manualshive.com logo in svg

Furuno FAR-1416, Operator'S Manual

The Furuno FAR-1416 Operator's Manual is a comprehensive guide for users of the FAR-1416 radar system. Available for free download from manualshive.com, this manual provides detailed instructions and insights to help operators maximize their experience with this advanced marine navigation technology.

Share
Download
background image

5.  VIDEO PLOTTER OPERATION

5-45

5.6.4

Cancel the waypoint

1. Press the 

GO TO

 key.

A confirmation massage box appears.

2. Select [RUN], then press the 

left button

.

Waypoint is canceled.

5.6.5

Explanations on waypoint settings

The followings are about only the items which have 
not explained yet. [WAYPOINT SETTINGS] menu 
will appear from the [ROUTES/WAYPOINTS] 

o

 

[WAYPOINT SETTINGS].

[BEARING TO WAYPOINT]: The bearing display 
can be selected from [RELATIVE] or [TRUE].

[RNG & BRG MODE]: When a destination is se-
lected, the distance and bearing will be displayed 
on the upper side of display unit. [GREAT CIR.] or 
[MERCATOR] can be selected as a method of cal-
culating the bearing and distance. The calculation 
method selected with this menu will be adopted to 
the calculation of total distance of route.

[GREAT CIR.]: This course line is the shortest 
course between two points on the surface of the 
earth, like stretching a piece of string between two 
points on earth. Frequent bearing changes are required to navigate by this method. 
For long-range navigation, divide the Great Circle route into several routes, and navi-
gate each route by rhumb Line.

[MERCATOR]: This method calculates the range and bearing between two points 
drawn on a nautical chart. Since the bearing is kept constant it is ideal for short-range 
navigation.

[WPT ARRIVAL TIME]: Select the information to display when setting the destination.

[TTG]: Time to go to the destination.

[ETA]: Estimated time of arrival.

[WAYPOINT OVERWRITE]: Select to show the confirmation message or not when 
using the same name to the existing waypoint name.

[WPT NAME ZERO DISPLAY]: Select the way of displaying the waypoint ([HIDE “0”] 
or [ALL “0”]). If the waypoint name use only numerals, 0 will not be displayed when 
[HIDE “0”] is selected.

XXXXXX
SET AS A DESTINATION.
CANCEL DESTINATION?

 

RUN

 CANCEL 

[WAYPOINT SETTINGS]

1.  BACK
2.  BEARING TO WAYPOINT
     REL/TRUE
3.  RNG & BRG MODE
     GREAT CIR./MERCATOR
4.  WPT ARRIVAL TIME
     TTG/ETA
5.  WPT REFRESH SETTING
     WPT

 

ON VERTICAL LINE/

     ARRIVE ALERT RANGE
6.  WAYPOINT OVERWRITE
     CONFIRM/NO CONFIRM
7.  WPT NAME ZERO DISPLAY
     HIDE “0”/ ALL “0”
8.  WPT CURSOR INFORMATION
     OFF/ON

[TTG] selected

[ETA] selected

Summary of Contents for FAR-1416



































































































































































































































Reviews:

No comments

Related manuals for FAR-1416

DS18 MRX2 Instruction Manual preview
MRX2
Brand: DS18 Pages: 16
Keiki MRG-10 User Manual preview
MRG-10
Brand: Keiki Pages: 55
MicroAir Avionics T2000UAV-L Installation And User Manual preview
T2000UAV-L
Brand: MicroAir Avionics Pages: 24
Eagle EVR-100 Operation Instructions Manual preview
EVR-100
Brand: Eagle Pages: 32
Seastar Solutions Optimus Seastation Quick Reference Manual preview
Optimus Seastation
Brand: Seastar Solutions Pages: 2
Uniden UH089NB Owner'S Manual preview
UH089NB
Brand: Uniden Pages: 28
PRAKTIK 6M User Manual preview
6M
Brand: PRAKTIK Pages: 41
B&G h3000 User Manual preview
h3000
Brand: B&G Pages: 240
Marine PC WPD Series User Manual preview
WPD Series
Brand: Marine PC Pages: 8
Marine Instruments M3P User Manual preview
M3P
Brand: Marine Instruments Pages: 28
Lowrance SonicHub Operation Manual preview
SonicHub
Brand: Lowrance Pages: 52
VDO WIND Installation And Operating Instructions Manual preview
WIND
Brand: VDO Pages: 23
Navico 2kW Installation Manual preview
2kW
Brand: Navico Pages: 80
JRC JFE-400 Instruction Manual preview
JFE-400
Brand: JRC Pages: 104
Xintex G-1BB-R Owner'S Manual & Installation Instructions preview
G-1BB-R
Brand: Xintex Pages: 9
E2S SONF1 Series Instructions/Service Manual preview
SONF1 Series
Brand: E2S Pages: 2
olympia electronics ΒS-521/1 Quick Start Manual preview
ΒS-521/1
Brand: olympia electronics Pages: 4
ProFurl NEX 0.9 Installation Manual preview
NEX 0.9
Brand: ProFurl Pages: 4

Brands by name

Popular brands

Load more brands