Furuno FA-30, Operator'S Manual

Page: 14 / 40

6
2. WEB SOFTWARE SETUP,
DATA DISPLAYS
2.1 AIS Receiver FA-30
The FA-30 has no power switch. Power is fed from the ship’s switchboard, and a power switch on
the switchboard turns the FA-30 on or off. When powered, the PWR LED (green) on the cover
lights. The two other LEDs on the cover flash or light with equipment state. The ER LED (red) lights
while the equipment is being initialized, and flashes when equipment error is found. The RX LED
(orange) lights when receiving.
RX LED
Lights (in orange) 50 ms when channel RX1/RX2 is receiving.
ER (Error) LED
Flashes (in red) for RAM, ROM, RX1+RX2 error.
PWR (Power) LED
Lights (in green) when power is on.