Furuno FA-170 Operator'S Manual Download Page 72

Page: 72 / 100

3. MAINTENANCE, TROUBLESHOOTING

3-4

3.4.2

Transponder test

The transponder tests two aspects of the transponder: transponder memory and inter-
nal GPS receiver.

To run this test, do the following:

1. Press the

MENU/ESC

key to open the main menu.

2. Select [DIAGNOSTICS] then press the

ENT/ACK

key.

3. Select [TRANSPONDER TEST] then press the

ENT/ACK

key.

4. The transponder program number and serial number are displayed and the ROM

and RAM are checked. The results of the ROM and RAM check are displayed as
"OK" or "NG" (No Good). For any "NG", contact your dealer for advice.

The GPS test results are displayed the format shown below.

5. Press the

MENU/ESC

key to return to the [DIAGNOSTICS] sub-menu.

OK: Normal
NG: No Good - Appears along with reason for NG.

• ROM ERROR
• RAM ERROR
• MEMORY ERROR
• COM ERROR
• ANTENNA ERROR

TRANSPONDER TEST

PROGRAM NO.

0550255-XX.XX
1000-42xx-xxx

OK
OK
OK

SERIAL NO.

ROM
RAM
GPS

: BACK

Summary of Contents for FA-170





































































































Search results

Summary of Contents for FA-170

Reviews:

Related manuals for FA-170

Brands by name

Popular brands

Furuno FA-170, Operator'S Manual

Search results

Summary of Contents for FA-170

Reviews:

Related manuals for FA-170

Brands by name

Popular brands