1. OPERATION
1-14
1.8.2
Target list
The [TARGET LIST] can store up to 2048 AIS targets and AIS-SARTs being detected
by the FA-170. Targets are displayed across several pages, in the order which they
are detected. The list can be sorted in range order, from closest to farthest.
Note:
The last viewed list is displayed when the
DISP
key is pressed to show either
the [TARGET LIST] or the [DANGEROUS LIST]. To view the [TARGET LIST] when
the [DANGEROUS LIST] is displayed, follow the procedure outlined in step 3 on the
following page.
1. Press the
DISP
key until the [TARGET LIST] is displayed.
The [NAME/MMSI/TYPE] column of the [TARGET LIST] displays the target ves-
sel’s type in the following formats:
Where the target type is CLASS A/CLASS B/AtoN
The name of the vessel is displayed when the name data is available. Where the
name data is not available, the vessel’s MMSI is displayed.
Where the target type is SAR(VESSEL/AIRCRAFT)/SART/MOB/EPIRB
The format in which data is displayed is listed in the table below.
Where the target type is BASE STATION
"BS:(Base station’s MMSI)" is displayed.
Note 1:
If there is no data for the target selected, the fields are displayed as "=NO
TARGET=".
Note 2:
Targets are automatically sorted in range order (closest to farthest) when
no key is operated for 30 seconds. Target order is then updated every five sec-
onds.
Active AIS-SARTs take priority and are displayed at the top of the list.
Note 3:
When [AUTO SORT] on the [USER SET] menu is [OFF], the range and
bearing to a target are updated. However, target order is not updated. To manu-
ally sort targets, see step 2.
Note 4:
To select a target on the plotter display, press
S
or
T
to select the target
then press the
ENT/ACK
key. Press
S
to cycle through targets from nearest to
furthest;
T
to cycle through targets from farthest to nearest.
TYPE
Display format
TYPE
Display format
SAR vessel
"SAR/VESSEL"
MOB Active
"MOB ACTIVE"
SAR aircraft
"SAR/AIRCRAFT"
MOB Test
"MOB TEST"
SART Active
"SART ACTIVE"
EPIRB Active
"EPIRB ACTIVE"
SART Test
"SART TEST"
EPIRB Test
"EPIRB TEST"
TARGET LIST
12:32:01
1-8 (334)
: CURSOR
: FUNC
ENT
: PAGE
: NEXT
DISP
SAMPLE SHIP_003
3 .3
182.0
0
BS:123456789
3
.3
056.0
0
SAMPLE SHIP_005
3 .3
084.0
0
{SAR/VESSEL}
3 .3
039.0
0
{SAR/AIRCRAFT} 3
.3
045.0
0
SAMPLE SHIP_008
3 .3
054.0
0
SAMPLE SHIP_002
3 .3
095.0
0
SAMPLE SHIP_001
3 .3
180.0
0
NAME/MMSI/TYPE
RNG[km]
BRG[ º ] AGE[ ‘ ]
B
A
A
SAR
B
SAR
NAME/MMSI/TYPE
: Target’s
MMSI, name or type is displayed.
Where name data is available,
the vessel name is displayed.
RNG[km]
: Range from OS to
target.
BRG[ º ]
: Bearing to target.
AGE[ ‘ ]
: Time (in minutes) since
the target data was last updated.
Target type symbols.
See Appendix 5 of the
operator’s manual for a
full list of AIS symbols
and their meanings.
Selected target is highlighted.
Time at which the list was last sorted.
Currently displayed target group.
Total detected targets is displayed in
brackets.
