Furuno FA-170 Installation Manual Download Page 7

Page: 7 / 76

1-1

MOUNTING

1.1

How to Install the Antenna Unit(s)

1.1.1

GPS antenna unit (GPA-017S)

Install the GPS antenna unit referring to the outline drawing at the back of this manual.

When selecting a mounting location for the antenna, keep in mind the following points.

• Select a location out of the radar beam. The radar

beam will obstruct or prevent reception of the GPS
satellite signal.

• There should be no interfering object within the

line-of-sight to the satellites. Objects within line-of-
sight to a satellite, for example, a mast, may block
reception or prolong acquisition time.

• Mount the antenna unit as high as possible to

keep it free of interfering objects and water spray, which can interrupt reception of
GPS satellite signal if the water freezes.

• Referring to the drawing at the back if this manual, leave sufficient space between

all antennas to avoid mutual interference.

How to extend the antenna cable

Three types of antenna cable extensions are optionally available.

a) Antenna cable set CP20-02700



Securing and waterproofing the connector
Referring to the figures in section 2.2.1 secure and waterproof the connections.

b) Antenna cable set CP20-02720 (8D-FB-CV, 40m)/CP20-02710 (8D-FB-CV, 50m)

Connect the cable the same as a) above.

NOTICE

Do not apply paint, anti-corrosive sealant or contact spray
to coating or plastic parts of the equipment.

Those items contain organic solvents that can damage coating
and plastic parts, especially plastic connectors.

Mast

Other Antennas

Bridge

GPS antenna unit

Antenna Unit

Antenna Cable

30 m

1 m

Fabricate locally. (See next page.)
N-P-8DFB

FA-1701

: Connector

Conversion
Cable Assy.
NJ-JP-3DXV-1

TNCP-NJ

0.2m

Summary of Contents for FA-170













































































Search results

Summary of Contents for FA-170

Reviews:

Related manuals for FA-170

Brands by name

Popular brands

Furuno FA-170, Installation Manual

Search results

Summary of Contents for FA-170

Reviews:

Related manuals for FA-170

Brands by name

Popular brands