UAIS TRANSPONDER FA-100
Operator’s Guide
The purpose of this Operator's Guide is to provide basic operating procedures for this equipment. For
more detailed information see the Operator's Manual.
Turning on and off
·
Press POWER key.
After self-test, the plotter display appears.
[- - - - - -]
SOG:
- - -.- kt
COG:
- - -.- deg
INTRD: 0
[
]: FWD
[
]: BACK
RNG: 1.50
n
m
Adjusting brilliance and contrast
1. Press CLR/ALT and SFT keys together.
BRILLIANCE
CONTRAST
ESC: [ENT]
2. Press
▲
or
▼
to adjust brilliance;
◄
or
►
to
adjust contrast.
3. Press
ENT
key.
Setting up for a voyage
Enter at the start of a voyage: draught,
destination, navigation, status, etc.
1. Press MENU, [5], and [1] key in that order.
+ -
123
[SET SHIP DATA]
DRAUGHT: 07.5 m
DTE
: KEY & DISP
2. DRAUGHT is selected; enter ship's current
draught.
3. Press ENT, and then [2] key.
[SET DESTINATION]
DATE:
0
0/00 (DD/MM)
TIME: 00:00
DESTINATION:
NONE
4. Press NEXT to choose DATE, TIME or
DESTINATION and enter estimated date/time
of arrival or destination waypoint.
5. Press ENT, and then [3] key.
STATUS NAME
[SET STATUS]
NAV STATUS: 00
UNDER WAY USING
ENGINE (DEFAULT)
6. Press
▲
,
▼
,
◄
or
►
key to choose
appropriate navigation status.
7. Press ENT, and then [4] key.
TYPE NAME
[SET TYPE&CREW]
CREW : 0012
TYPE CLASS : A
TYPE NO. : 0
+ -
8. CREW is selected; enter number of crews.
9. Press NEXT to choose TYPE NO. and press
arrow keys to choose appropriate type
number.
▲
,
▼
: Increment, decrement by 1
◄
,
►
: Increment, decrement by 10
10. Press ENT and MENU in that order.
SAVE ?
YES
NO
CANCEL
11. YES is selected; enter ENT.
Setting CPA/TCPA
1. Press MENU, [5], and [5] key in that order.
[SET CPA/TCPA]
CPA:
0
.90 nm
TCPA:
01 min
ACTV:
DSBL
+ -
2. Enter CPA and press NEXT.
3. Enter TCPA and press NEXT.
4. Press SFT to choose ENBL to activate the
CPA/TCPA alarm; DSBL to disable it.
5. Press ENT, MENU and ENT in that order.
Enabling/Disabling buzzer
1. Press MENU, [6] and [5] key in that order.
[SET BUZZER]
ALARM
: ON
CPA/TCPA : ON
MSG ALM : ON
+ -
+ -
+ -
2. Press SFT to choose ON or OFF for each item.
ALARM: for system trouble
CPA/TCPA: for CPA/TCPA alarm
MSG ALM: for incoming message
