Furuno ENVISION AR-100M Operator'S Manual Download

Page: 47 / 73

2. INSTALLATION AND INITIAL SETTINGS

2-17

2.3.9

Settings for connected equipment

For the satellite speed log (GS-100), SATELLITE COMPASS

™

(SC series) and EC-

DIS (FMD-3200/3300), set them as shown below to connect with the AR navigation
system.

Satellite speed log/SATELLITE COMPASS

Set the transmission rate of the GPatt sentence to “200 msec” or below.

Note:

If the communication load is high, reduce the transmission rate for other sen-

tences or turn some sentences off to reduce the communication load.

ECDIS

• Set [Output Route Data Setting] to [File and RMB] on the [TCS] tab of the [Common

Installation Setting] menu.

• Check the checkbox for [Output Chart Objects] on the [Basic Setting] tab of the

[Common Installation Setting] menu.

Note:

The AR navigation system cannot overlay ENC chart objects despite the set-

ting for the [Output Chart Objects] checkbox, if the ECDIS has C-MAP charts in-
stalled. Uninstall C-MAP charts to use ENC chart objects.

• Select the equipment ID of the ECDIS that outputs the route data, on the ECDIS

menu.

ECD001

Summary of Contents for ENVISION AR-100M










































































Search results

Summary of Contents for ENVISION AR-100M

Reviews:

Related manuals for ENVISION AR-100M

Brands by name

Popular brands

Furuno ENVISION AR-100M, Operator'S Manual

Search results

Summary of Contents for ENVISION AR-100M

Reviews:

Related manuals for ENVISION AR-100M

Brands by name

Popular brands