Furuno DS-85, Operator'S Manual, Page: 31 / 44

2. MAINTENANCE
20
2.6.2 Indications log
The indications log stores the latest non-active 100 indications, the latest one at the top of the list.
When the log becomes full, the oldest entry is erased to make room for the latest. The log is up-
dated whenever there is a change to the status of any indication. If the log contains no entries, [=
NO INDICATIONS =] appears in the log.
To show the indications log do the following:
1. Press the MENU/ESC key to open the main menu.
2. Select [5 INDICATION], then press the ENT key.
3. Press  on the CursorPad to select the [LOG] tab to show the indication log.
4. To show the associated indication message (in the guidance/alert info area) for an indication
title, select the indication title with the cursor.
5. Press the DISP key to close the list.
2.7 Alert Icons
The table below shows the alert icons that appear in the alert log and indications log. If no icons
are shown there are no active or inactive alerts or indications.
Icon Priority level Coloring Description
Caution Yellow color, black symbol An error that requires
immediate attention.
Indication Blue color, white symbol An error that requires
attention.
Time, date alert
generated.
Appears only when
time, date are fed
from an external
navigation device.
If there is no exter-
nal data, “- -” appears.
Exports indications list and indications log
(for serviceman use).
Indication icon
Indication title
LOG tab, number of
entries in log
Indication
message