Furuno DS-85, Operator'S Manual, Page: 15 / 44

1. OPERATION
4
Guidance/alert info
The guidance/alert info area mainly provides operating information for the current display. The
contents of the guidance changes according to the display.
Alert info appears when an alert is generated. See Appendix 4 for alert information.
1.6 Display Modes
The DS-85 has five display modes: speed/distance log, speed (digital), speed (analog and digital
indications), distance log, and alert display.
To select a display mode other than the alert display, press the DISP key successively. The mode
changes in the sequence shown in the figure below.
To display the alert list display, long press the MENU/ESC key.
1.6.1 Speed/distance log display
The speed/distance log display shows the speed and distance log on a horizontal split screen,
speed and vessel direction on the top, and the distance log on the bottom. The arrow indication
to the left of the speed reading indicates the direction in which the vessel is moving. for forward,
for reverse.
Note: In stormy weather, speed error may occur due to the effect of air bubbles. When this type
of error occurs, the speed indication freezes and the background color of the speed unit becomes
yellow. If the error continues for more than 30 seconds, the speed indication will be displayed as
“- -.-” or - -.- -”.
Speed/Distance Log
Speed (digital)
Speed (analog and digital) Distance Log
Alert display
(Hold MENU/ESC key
to show.)
NEXT
NEXT
NEXT
NEXT
STW, distance display SOG, distance display
NEXT NEXT