Furuno DS-85, Operator'S Manual, Page: 11 / 44

i
x
SYSTEM CONFIGURATION
External KP
(EXT KP IN)
DIMMER
for
ANALOG
DISPLAY
UNIT
ANALOG
DISPLAY
UNIT
REMOTE
CONTROLLER
RD-501*
1
or
DIMMER
CONTROLLER
RD-502*
1
DISPLAY UNIT
(Main)
DS-8500
Sub display
RD-50 or
RD-20 or
DS-8500
Sub display
RD-20 or
DS-8500
DIMMER
CONTROLLER
RD-502
RANGE
SELECTOR* 2
DS-389 or
MF22R-1 or
MF22R-2
DIMMER
for
ANALOG
DISPLAY
UNIT*
3
RANGE
SELECTOR* 2 * 3
DS-389 or
MF22R-1 or
MF22R-2
TRANSDUCER
DS-8530
JUNCTION BOX
CI-630
TRANSCEIVER
UNIT
DS-8520
100-115/200-220 VAC
1Ø, 50/60 Hz
100-115/200-220 VAC
1Ø, 50/60 Hz
* 1 : Not available for DS-8500
*
2
: Range Selector
may or may not
be connected.
*
3
: LIF board is required in the distributor unit.
Analog Current Signal Output*
3
Analog Current Signal Output* 3
Analog Voltage Signal Output* 3
Nav Equipment
(POWER FAIL)
: Standard supply
: Optional or local supply
Category of units
Display Unit
Distributor Unit
Transceiver Unit
Protected from the weather
Protected from the weather
Protected from the weather
Transducer Submerged or in continuous
contact with seawater
ANALOG
DISPLAY
UNIT* 3
Nav Equipment
(LAN)
IEC61162-450
Nav Equipment
(Serial, Input)
- IEC61162-1 × 1
- IEC61162-1/2 × 1
Nav Equipment
(Serial, Output)
- IEC61162-1 × 7
- IEC61162-1/2 × 1
DISTRIBUTOR
UNIT
DS-8510
Nav Equipment
(SYSTEM FAIL*
3
)*
Nav Equipment
(LOG OUT* 3 )