Furuno DRS12AX X-Class, Installation Manual

Page: 21 / 52

15
2. INITIAL SETUP
This radar series is compatible with the FURUNO Multi Function Displays and soft-
ware version combinations shown below. The combination with other models may not
operate properly.
• DRS6A X-Class
TZT9, TZT14 and TZTBB: Version 4.21 or later
TZTL12F and TZTL15F: Version 3.01 or later
• DRS12A X-Class and DRS25A X-Class
TZT9, TZT14 and TZTBB: Version 5.01 or later (Planned release: End of 2016)
TZTL12F and TZTL15F: Version 4.01 or later (Planned release: End of 2016)
Turn on the antenna unit and FURUNO Multi Function Display. Initial setup for this an-
tenna must be done on the FURUNO Multi Function Display.
Before turning on the radar, be sure
no one is near the antenna.
Prevent the potential risk of being
struck by the rotating antenna, which
can result in serious injury or death.
WARNING
The radar antenna emits
electromagnetic radio frequency
(RF) energy which can be
harmful, particularly to your eyes.
Never look directly into the
antenna aperture from a close
distance while the radar is in
operation or expose yourself to
the transmitting antenna at a
close distance.
Distances at which RF radiation
levels of 100, 50 and 10 W/m
2
exist
are given in the table below.
WARNING
0.1 m XN10A 3 m 0.5 m
100 W/m
2
50 W/m
2
10 W/m
2
Radiator
XN12A
XN13A
N/A 2.2 m 0.4 m
N/A 1.9 m 0.2 m
DRS6A X-Class
0.3 m XN12A 3.1 m 0.8 m
100 W/m
2
50 W/m
2
10 W/m
2
Radiator
XN13A 0.2 m 2.9 m 0.7 m
DRS12A X-Class
0.8 m XN12A 7.7 m 1.7 m
100 W/m
2
50 W/m
2
10 W/m
2
Radiator
XN13A 0.7 m 6.8 m 1.6 m
DRS25A X-Class