Furuno Doppler Speedlog DS-510, Installation Manual, Page: 33 / 66

5.2 Cable Fabrication
26
3. CIF/NMEA Data Signal Cable (CO-SPEVV-SB-C 0.2X5P)
Anticorrosive
Sheath
Armor Vinyl sheath
Pin
Connector shell
Set Screw
Screw
Figure 5-4 Cable fabrication
4. Other Cables
All other cables are terminated at a terminal strip.
1) Processing the armor
<Cable passed through cable clamp>
Locate the armor in the cable clamp.
Figure 5-5 Cable fabrication
<Cable passed through cable gland>
Solder a vinyl wire w/crimp-on lug to the armor and fasten it to the earth terminal.
Bare wire
Solder here.
Vinyl wire
Fasten to earth terminal.
Figure 5-6 Cable fabrication