www.furuno.com
REPLACEMENT INSTRUCTIONS
CAPACITOR INSTALLATION KIT OP05-143
AT-1575 ANTENNA COUPLER PCB
These instructions cover how to replace the PCB of AT-1575 antenna coupler for the SSB Radio
Telephone FS-1575.
Note:
Check the PCB version before replacement. The replacement board should be ordered
before proceeding with these instructions.
The new board 05P0883-22 (Code: 000-176-005-12) is not included with this kit.
Where the new board is already installed in the AT-1575, board replacement is not required.
Replacement kit
The contents of the kit are listed in the following table.
Capacitor Installation Kit OP05-143 (Code: 001-476-140)
How to remove the old PCB
1.
Unfasten the pan head screws (M4x14, 8 pcs.), then remove the cover.
Fig.1: Antenna Coupler AT-1575
Name
Type
Code
Qty.
Fixing Plate
05-062-0253
100-199-261-10
1
Clamp
CKN-05
000-193-375-10
1
Washer Head Screw
M4x6
000-163-176-10
2
Wire Assembly (Type AF)
AF1160GG-L100
001-482-240
1
Pan head screws
