3. LOWER USER MENU
19
3. Click .
4. Click a view setting number icon. The caution message "Are you sure to change registered
settings?" appears.
5. Click [Yes]. The following dialog box appears.
6. Enter the comment for the view setting (max. 64 characters) and then click [OK]. The com-
ment set here is displayed when the cursor is placed on the appropriate view setting number
icon.
7. Click
to hide the lower user menu.
How to select a view setting
Open the view setting menu and then click the view setting number icon among the registered
numbers.
How to reset the view setting
Open the view setting menu and then click
to reset the view setting to the default.
3.2
How to Connect/Disconnect the PC to the FSV-
25
1. Click
to show the lower user menu.
2. Click
to start communication with the FSV-25/25S. The color of the connect icon chang-
es to gray.
Note 1:
When the FSV-25/25S is not turned on, the gray indication of the connect icon is can-
celed 20 seconds after clicking
.
Note 2:
This function is not available while replaying the echo data.
Note 3:
When the communication is stopped without clicking
, the caution message
"Connection to sonar has been disconnected." appears. Click [OK] to delete this message.
Note 4:
When the echo data is lost, the caution message "Data acquisition failed." appears.
Click [OK] to delete this message.
3. To stop communication with the FSV-25/25S, click
. The color of the disconnect icon
changes to gray.
Summary of Contents for 3D Sonar Visualizer F3D-S
Page 1: ...3D Sonar Visualizer F3D S OPERATOR S MANUAL www furuno com Model Option for FSV 25 FSV 25S ...
Page 2: ......
Page 30: ......
Page 31: ......
