Furun 406080A-FUR, Operator'S Manual

Page: 10 / 40

Chapter 1: Introduction
2
1.2 Features
The 406080A-FUR AC/DC Power Supply Unit has the following
features:

Two DC connectors, output, range: 28.7 V - 31.2 V

Output power 300 W continuous, 370 W peak (2 min., 100-240 VAC)
or 270 W continuous, 333 W peak (2 min., 90-100 VAC)

Daisy-chaining of up to three units to give up to 1110 W.
1

AC input (100-240 VAC operating) with fuse (6.3 A) with Power
Factor Correction

Automatic detection of input voltage range

AC alarm and Short circuit protection

Over-temperature protection (shutdown with automatic restart)

Switch over to battery power in case of AC supply failure

No forced cooling required

On/off switch

IP 32 for internal high voltage areas (>42 V), IP 22 in other areas
when vertically mounted (wall) and connector panel is facing down
2

Approval and certification: IEC 60945 Maritime approval
1. Output power capability depend on the mounting position (horizontal or
vertical), input voltage, ambient temperature and ventilation at the place of
installation.
2. IP 30 and IP 20 for other mounting positions.