Furukawa electric S178, User Manual

Page: 149 / 162

Programming Guide
8-45
z Total Arc Counter: Only displays the current count and cannot be edited.
z Battery Mode: 1 batt./2 batt.
z Illumination Lamp: 15/14/13/
･･･
/OFF the lamp that illuminates V-groove.
z Fiber Image: Activating fiber image during arc discharging. Cancel / Active
z Splice Mode: Selecting priorities for splicing speed or core alignment certainty. Fast / Fine
8.5.2. Counter
1. Select a Setting item in the “Counter“ list and press Enter
key.
2. Pop-up window shows available functions. Press
▲ ▼
keys to select desired function and press Enter key.
3. Pop-up window shows available setting. Press
▲ ▼
keys to select desired setting and press Enter key.
4. Press Escape key and a pop-up window prompts the
operator to confirm the change. Select “Over write” to
confirm the change, or “Cancel” to cancel the operation and press Enter.
5. Repeatedly press Escape key until the Ready screen is displayed.