Furukawa electric S178, User Manual

Page: 147 / 162

Programming Guide
8-43
1. Select “Setting” in the Menu screen and press Enter key.
2. Select Sub-Menu and press Enter key.
3. Select Setting item and press Enter key.
4. Follow the procedure below for setting each item.
5. Press Escape to return to the previous screen.
8.5.1. Parameter
1. Select a Setting item in the “Parameter“ list and press Enter key.
2. Pop-up window shows the current setting. Press
▲ ▼
keys to scroll the available settings and press Set key to
change.
3. Press Escape key and a pop-up window will ask the
operator to confirm the change. Select “Over write” to
confirm the change, or “Cancel” to cancel the operation and
press Enter.
4. Repeatedly press Escape key until the Ready screen is
displayed.