ASSEMBLY INSTRUCTIONS
Page
12
STEP6
Hardware #8
=
4pcs
Hardware #11
=
4sets
ASSEMBLY IS COMPLETED
Make
sure
the product is rested on a flat surface and does not feel loose or wobbly. If it does, double
check that the bolts/screws are secured and properly tightened.
Extend the two outer slides of the runners
so that they could align with the sides of
the drawer. Make sure the pre-drilled
holes from the drawer align with the
screw holes of the outer slides.
Secure two screws from the inside of the
drawer using a Phillips screwdriver to
tighten them to the outer slides.
X2
P
8
8
11
T
X4
T
G
F
