Page
11
ASSEMBLY INSTRUCTIONS
Hardware #9
=
4pcs
Hardware #12
=
4pcs
STEP8
A
12
Extend the two outer slides
of the runners so that they
are align with the sides of
the drawer. Make sure the
pre-drilled holes from the
drawer align with the screw
holes of the outer slides.
Secure two screws from the
inside of the drawer using a
Phillips screwdriver to tighten
them to the outer slides.
ASSEMBLY IS COMPLETED
Make
sure
the product is rested on a flat surface and does not feel loose or wobbly. If it does, double
check that the bolts/screws are secured and properly tightened.
9
S
S
W
Hardware #15
=
4pcs
Hardware #16
=
4pcs
15
16
11
Hardware #11
=
1pc
