I.
With the help of another person, carefully place the table top
(#1) facing down on a protected surface.
II.
Align the 4 legs (#3) with the pre-drilled holes on the bottom
corners of the table top (#1).
III.
Prepare 8 bolt assemblies by inserting FIRST the lock washer
(#C) onto the bolt #A) and then the flat washer (#B) onto the
SAME bolt (#A), in that order.
IV.
Insert the bolt assemblies through the pre-drilled holes on the
bottom corners of the table top (#1) and secure those bolts
using the Allen wrench (#D) to lock them with the 4 legs (#3).
V.
Carefully turn the completed table upright. Make sure the table
is rested on a flat surface and does not feel loose or wobbly. If it
does, double check that the bolts/screws are secured and
properly tightened.
Turn right (clockwise) to tighten
Page 4 of 5
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
#3
#3
#3
#3
#3
Summary of Contents for Tuscany CM3845T
Page 2: ...Page 2 of 5...
