I.
Prepare the assembly of the
knob (#E) to the drawer of the
dresser (#1) by using 6 plastic
washers (#G) and two screws
(#F). See diagram for the
correct sequence in connecting
those parts.
II.
Secure the screws (#F) from
the inside of the drawer using a
Phillips screwdriver to HAND-
TIGHTEN
. Caution:
Do not
use power tool and do not over-
tighten for damage to the glass
surface may result.
III.
Repeat the above process to
assemble the remaining 7
knobs (#E) onto the drawers.
Page 5 of 6
Turn right (clockwise) to tighten
ASSEMBLY IS COMPLETED
#E x 8 pcs
#F x 16 pcs
#G x 48 pcs
#G
#F
#1
Make sure the dresser is rested on a flat surface and it
does not feel loose or wobbly. If it does, double check
that the bolts/screws are secured and properly tighten.
Summary of Contents for Golva CM7295D
Page 2: ...Page 2 of 6...
