Insert stand A (#2) through stand B (#3). Make
sure the cutouts are aligned with each other.
Turn right (clockwise) to tighten
Page 5 of 6
#B x 8 pcs
#D x 8 pcs
#E x 8 pcs
#G x 2 pcs
#H x 1 pc
I.
Insert the flat bracket (#H) through the cutout on the stand A (#2) and align with the pre-drilled
holes on the stand B (#3).
II.
Prepare 2 bolt assemblies by inserting FIRST the lock washer (#D) onto the bolt (#B) and then
the flat washer (#E) onto the SAME bolt (#B), in that order.
III.
Insert the bolt assemblies through the holes on the flat bracket (#H) and secure those bolts
using the Allen wrench (#F) to lock them with the stand B (#3).
IV.
Align the long sides of the two base brackets (#G) with the pre-drilled holes on the stand A (#2)
and the stand B (#3).
V.
Prepare 6 bolt assemblies by inserting FIRST the lock washer (#D) onto the bolt (#B) and then
the flat washer (#E) onto the SAME bolt (#B), in that order.
VI.
Insert the bolt assemblies through the holes on the base brackets (#G) and secure those bolts
using the Allen wrench (#F) to lock them with the stand A (#2) and the stand B (#3).
#3
#2
Summary of Contents for CM4401E
Page 3: ...Page 3 of 6 ...
