Turn right (clockwise) to tighten
Page 7 of 8
#A x 3 pcs
#B x 3 pcs
#C x 3 pcs
Turn right (clockwise) to tighten
Align the seat cushion (#1) onto the top of the seat
frame (#2). Tighten 4 screws (#E) through the bottom of
the seat frame (#2) using the Phillips screwdriver to
secure them with the seat cushion (#1).
#E x 4 pcs
I.
Insert the center leg (#4) and
the two side legs (#5) into the
seat frame (#2).
II.
Prepare 3 bolt assemblies by
inserting FIRST the lock washer
(#B) onto the bolt (#A) and then
the flat washer (#C) onto the
SAME bolt (#A), in that order.
III.
Insert the bolt assemblies
through the pre-drilled holes on
the seat frame (#2) and secure
those bolts using the Allen
wrench (#D) to lock them with
the center leg (#4) and the two
side legs (#5).
#2
Summary of Contents for CM4321C
Page 2: ...Page 2 of 8...
