I.
Place the backrest with legs
(#1) on a protected surface.
Align the seat (#2) with the
pre-drilled holes of the
backrest with legs (#1).
II.
Prepare 2 bolt assemblies by
inserting FIRST the lock
washer (#B) onto the bolt (#D)
and then the flat washer (#A)
onto the SAME bolt (#D), in
that order.
III.
Insert the bolt assembly near
the center holes of the seat
(#2) and secure those bolts
using the Allen wrench (#F) to
lock them with the backrest
with legs (#1).
Turn right (clockwise) to tighten
Page 5 of 6
#A x 2 pcs
#B x 2 pcs
#D x 2 pcs
I.
Prepare 4 bolt assemblies by
inserting FIRST the lock
washer (#B) onto the bolt
(#C) and then the flat washer
(#A) onto the SAME bolt
(#C), in that order.
II.
Insert the bolt assemblies
through the pre-drilled holes
in the corners of the seat (#2)
and secure those bolts using
the Allen wrench (#F) to lock
them with the backrest with
legs (#1).
Turn right (clockwise) to tighten
#A x 4 pcs
#B x 4 pcs
#C x 4 pcs
Summary of Contents for CM3710PC-2PK
Page 3: ...Page 3 of 6 ...
