Page 5 of 6
Step 4
For the other half of the table, repeat Step 2 and
Step 3 again. Make sure you use the correct
hardware with the proper parts.
Step 3
#1
#2
I.
Align the connecting frame (#3)
onto the two pre-drilled holes of
the leg (#2).
II.
Prepare a bolt assembly by
inserting FIRST the spring
washer (#E) onto the bolt (#D)
and then the flat washer (#G)
onto the SAME bolt (#D), in that
order.
III. Insert the bolt assembly through
the hole of the connecting frame
(#3) and secure that bolt using
the Allen wrench (#A) to lock it in
with the leg.
IV. Use the plastic cap (# I) to cover
the hole. Repeat the process
for the other hole of the
connecting frame.
V. Repeat the process for the other
connecting frame as pictured.
#2
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
#2
#3
Summary of Contents for CM3559T
Page 2: ...Page 2 of 6 ...
