Step 1
Align the metal plate (#H) onto the two pre-drilled holes of the
leg (#2). Secure that plate with the leg by using the Allen
wrench (#A) to tighten the two flat-head bolt (#C).
Repeat the process for the other side and for the remaining 3
legs.
Step 2
I.
With the help of another person,
carefully place the table top (#1)
facing down on a protective
surface. Take the assembled leg
(#2) and align the metal plates (#H)
with the 4 pre-drilled holes on the
back of the table top (#1)
II.
Prepare a bolt assembly by
inserting FIRST the spring washer
(#E) onto the bolt (#B) and then the
flat washer (#F) onto the SAME
bolt (#B), in that order.
III. Insert the bolt assembly through
the hole of the metal plate (#H) and
secure that bolt using the Allen
wrench (#A) to lock it in with the
table top. Repeat the process for
the remaining 3 holes of the metal
plates.
IV. Repeat the process for the other
assembled leg as pictured.
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
Page 4 of 6
#1
#2
#2
Summary of Contents for CM3559T
Page 2: ...Page 2 of 6 ...
