I.
Place the backrest with legs (#3)
on a protected surface. Align the
seat (#2) with the pre-drilled
holes of the backrest with legs
(#3).
II.
Prepare a bolt assembly by
inserting FIRST the lock washer
(#D) onto the bolt (#C) and then
the flat washer (#E) onto the
SAME bolt (#C), in that order.
III.
Insert the bolt assembly through
the pre-drilled hole on the center
of the seat (#2) and secure that
bolt using the Allen wrench (#F)
to lock it with the backrest with
legs (#3).
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
Page 4 of 5
#C x 1 pc
#D x 1 pc
#E x 1 pc
#A x 4 pcs
#D x 4 pcs
#E x 4 pcs
I.
Prepare 4 bolt assemblies by
inserting FIRST the lock
washer (#D) onto the bolt
(#A) and then the flat washer
(#E) onto the SAME bolt
(#A), in that order.
II.
Insert the bolt assemblies
through the pre-drilled holes
in the corners of the seat (#2)
and secure those bolts using
the Allen wrench (#F) to lock
them with the backrest with
legs (#3).
Summary of Contents for CM3311SC-2PK
Page 2: ...Page 2 of 5...
