I.
Carefully place the bench (#2) facing down on a protected surface.
II.
Align the 4 legs (#1) with the pre-drilled holes on the bottom corners of the bench
(#2).
III.
Prepare 8 bolt assemblies by inserting FIRST the lock washer (#B) onto the bolt
(#C) and then the flat washer (#A) onto the SAME bolt (#C), in that order.
IV.
Insert the bolt assemblies through the pre-drilled holes on the bottom corners of
the bench (#2) and secure those bolts using the Allen wrench (#D) to lock them
with the 4 legs (#1).
V.
Carefully turn the completed bench upright. Make sure the bench is rested on a
flat surface and does not feel loose or wobbly. If it does, double check that the
bolts/screws are secured and properly tightened.
Turn right (clockwise) to tighten
Page 4 of 4
ASSEMBLY IS COMPLETED
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
Summary of Contents for CM3311BN
Page 2: ...Page 2 of 4...
