DO NOT FULLY TIGHTEN UNTIL STEP IS DONE.
1) Align mirror stretchers (#7) to the holes of the mirror
(#8). Make sure to place the nuts (#F) in-between the
holes of the mirror (#8) and mirror stretchers (#7), then
secure with bolts (#E).
2) Align mirror stretchers (#7) to the holes of the back
frame (#6), then secure with bolts (#A).
3) Fully tighten all the bolts (#A,E), then attach the foot
caps (#B) to the bottom of the side panels (#4).
Attach the glass pads (#D) to the desk top and then carefully place the glass (#9) to the desk.
