Page 1: ... the degree of effort needed in assembling a specific product with 1 being easy and 5 being difficult For some products two persons are recommended CM7977D 2 PERSONS RECOMMENDED Rev 18 12 20 For more information contact our team service ec foagroup com Tools Required For Assembly Phillips Screwdriver Not Included ...
Page 2: ... comes with height adjustment knobs underneath each leg To lower or to raise each leg you need to turn clockwise or counterclockwise respectively Make sure all parts are properly aligned then use the appropriate hand tool to completely tighten the bolts or screws Do not use power tools and do not overtighten Position each part correctly and insert screws or bolts into their respective holes by han...
Page 3: ...Page 2 of Assembly and Care Advice And remember do not tighten until each step is completed or instructed Page3 of 4 Dresser 3 x 1pc Support Leg 35x35x110mm Ø1 4 2 x 4pcs Leg 3 1 2 Attach legs 2 and support leg 3 to the bottom holes of the dresser 1 ...
Page 4: ...Page4 of 4 ASSEMBLY IS COMPLETED ASSEMBLY IS COMPLETED Unscrew knobs inside of the drawer then reattach knobs to the outside of the drawers ...
