REMOTE POWER
SWITCHER, 60 A
PLUGLOCK-PRO
LOCKING OUTLET SYSTEMS
Furman Sound, Inc.
●
1997 South McDowell Blvd.
●
Petaluma, CA 94954 USA
Phone: (707) 763-1010
●
Fax: (707) 763-1310
●
Web: www.furmansound.com
®
The
PGP-S Power Switcher
is a three circuit 60 Amp
Remote AC Power Switcher designed primarily for use with
Furman’s PlugLock-PRO Locking Outlet Systems, models
PGP-20 and PGP-60. It may also be used with any other
commercial or custom-built conduit-wired outlet strips.
The PGP-S is housed in a rugged, 6" x 6" x 4" steel
junction box with three heavy-duty 20 Amp relays. It features
easy-to-connect Phoenix terminal blocks that allow remote
switches and LED indicators to be connected via safe,
inexpensive, low voltage Class 2 wiring. If sequenced turn-on
and turn-off is required, the switching function can be provided
by a Furman PowerLink Remote AC Power Sequence
Controller or ASD-120 Sequenced Power Distro. Remote
switching can be controlled by using any Furman power
control product, including the RS-1, RS-2, PS-8R and PS-PRO
in addition to the ASD-120.
The PGP-S is designed specifically for mounting at the
bottom of a PGP-20 or PGP-60, and also serves as a main
junction box for all power interconnects. It includes an internal
12 VDC supply, and can be controlled from remote locations
using the PowerLink, ASD-120, or, for simpler jobs, the
Furman RS-1 or RS-2 Remote System Control Panels. The
RS-1 provides a maintained key switch; the RS-2 has a
momentary switch. In larger installations, multiple PGP-S’s
may be controlled by a single switch closure, or by a
PowerLink or ASD-120 control signal. Please consult a
Furman service professional for specific installation and
application assistance.
All four sides of the enclosure have multiple knockouts to
accomodate every job. The PGP-S is designed for permanent
installation and accomodates conduit sizes from 3/4" through
1.5". Local codes should be checked for wiring requirements.
Use of a licensed electrical contractor is recommended for the
best and safest installation.
PGP-S
MODEL PGP-S
MODELS PGP-20, PGP-60
REMOTE POWER
SWITCHER, 60 A
PGP-S FEATURES
60 Amp capacity
Three heavy-duty 20 Amp relays
Housed in a rugged 6” x 6” x 4” steel junction box
Internal 12 VDC supply
Terminal strip allows Remote Control
Remote switching can be controlled by using any Furman
power control product
Mounts to the bottom of a PGP-20 or PGP-60; may also
be used with any other commerical or custom-built
conduit-wired outlet strips
Three Year Limited Warranty
