Funkwerk elmeg t444, Operating Instructions Manual, Page: 30 / 84

Activating the LCR procedure
b X ** q ==== q 7812 q
Lift up
handset
Ack.
signal
Enter PIN
(0000 = default set-
ting)
Ack. signal Code Ack.
signal
Deactivating the LCR procedure
b X ** q ==== q 781# q
Lift up
handset
Ack.
signal
Enter PIN
(0000 = default set-
ting)
Ack. signal Code Ack.
signal
Block dialing (Austria)
Using block dialing (prepared dialing) you can first input a number completely at a terminal device to put it into the buffer memory in the
PABX system. You can then initiate dialing of the complete number. Some network service providers require block dialing to enable direct
dialing to a certain terminal device. This feature is described in the operating instructions for the ISDN terminal devices. Block dialling is
also possible for internal communications.
b
Lift up the handset of your phone. You will hear the internal dial tone.
*55
Dial this code.
0
Dial this code
0
.
t
Dial the number you wish to call.
#
Begin dialing by pressing the key #.
Only now is the call transferred to the exchange.
You will hear the ringing signal in your handset.
The external party is being called.
The party being called lifts up the handset of his/her phone.
g
Conduct your call.
a
End the call by hanging up your handset.
Monitoring costs
26