Funkwerk elmeg t444, Operating Instructions Manual, Page: 26 / 84

Deactivating call forwarding
b # 61
/
62
/
63 q a
Lift up
handset
Permanent call forwarding /
Call forwarding on no reply /
Call forwarding on busy
Ack.
signal
Replace
handset
Call forwarding in Teams
Certain conditions apply to subscribers that are assigned to a team for call forwarding:
·
Each subscriber can initiate call forwarding from his/her internal number to a different subscriber (regardless of the
team that subscriber is assigned to).
·
Call forwarding from one team member to a team number is not possible. If call forwarding is initiated from one
team number to the team number for a different team, the function will not be active and the user initiating the call
forwarding function is called.
Follow me (call forwarding from another telephone)
If you are at a different location, and not at your phone, you have the possibility of having calls made to your phone while you are away for-
warded to a telephone near or at your current location (Follow me). You can also forward calls from other phones to your phone. When you
lift up the handset of your phone a special dial tone will remind you that you have call forwarding currently activated.
Internal configuration of call forwarding (Follow me, internal)
b *64 t # q a
Lift up
handset
Internal number whose
calls are to be forwarded
Ack.
signal
Replace handset.
Call will then be forwarded to the specified telephone.
Internal de-activation of call forwarding (Follow me, internal and external)
b #64 t # q a
Lift up
handset
Internal number for which
call forwarding is to be can-
celed
Ack.
signal
Replace handset.
Configuring/De-activating call forwarding from external location (Follow me, external)
For the weekend you have rerouted the fax number of your office to your private fax machine at home. Let’s say you’re on the way to the
office, which takes around 30 minutes, and would now like to also receive fax messages that are addressed to your office.
You then cancel the »Follow me - external« function at home and when you arrive at the office your fax messages will be waiting on you – ex-
actly where you need them.
You can use this function to configure or cancel call forwarding to any destinations.
To configure call forwarding, dial (from an external location) the multiple subscriber number (MSN) to which to the Service number (inter-
nal, virtual subscriber) has been assigned. In the initial state, the number 55 is entered as the service number.
Remote access must be enabled during configuration. The PABX uses the PIN to check the authorization for call forwarding from an exter-
nal location 2.
Please note that you must first allocate a service number to this multiple extension number (MSN) number during PC configuration.
The factory setting of the 6-digit authorization PIN 2 is. You must change the PIN2 in the PC configuration, as otherwise you will not be
allowed access to the PABX system.
You are located at an external telephone.
Lift up the handset of your phone and dial the MSN to which the internal service number of the PABX has been assigned to.
If remote activation of call forwarding has been enabled you will hear the special dial tone for your PABX system.
Set your phone to frequency (DTMF) dialing, or use a DTMF manual transmitter.
Never Out of Touch
22