Funkwerk elmeg t444, Operating Instructions Manual, Page: 21 / 84

Showing names in the display of the system telephone
When a subscriber is called by an internal or external party, the name that is entered in the telephone directory is shown in the display in ad-
dition to the telephone number. With internal calls, the name from the telephone directory is displayed only if no name has been entered du-
ring PC configuration under »Internal extension«. If a name has been entered here, this name is displayed, as it has priority over the name in
the telephone directory.
Speed dialing from the telephone directory
Every number in the PABX telephone directory is assigned to a speed dialing index (000...299). You can dial this speed dialing index in place
of the long number. The speed dialing memory is integrated into the PABX telephone directory. Observe the information provided in PC
configuration.
b *# t l g
Lift up
handset
Select
speed dialing index
Subscriber is called Conversation
Call deflection during regular signaling (Call Deflection)
If you are not able, or do not wish, to accept a call, you have the option of rerouting the call to a different subscriber while the call is being sig-
naled. When you forward a call to an external subscriber, you will be charged for the costs of the call from your phone to the forwarding des-
tination.
You can utilize this performance feature with system telephones of ISDN phones that support this function (refer to Operating Manual for
terminal devices).
Forwarding external calls to external parties
Forwarding of calls while the call is being signaled depends on the team that is being called:
If several members are entered for a team, call forwarding in the PABX is carried out via the second B channel of the ISDN connection. This
also applies when the connection has the feature CD (call deflection). The PABX can not be reached by external parties while call forwarding
is in progress.
If only one member is entered for a team, call forwarding in the PABX is carried out via the second B channel of the ISDN connection when
the connection does not have the feature CD. The PABX can not be reached by external parties while call forwarding is in progress. If the con-
nection does have the CD feature activated however, the call is forwarded to the exchange. Both B channels are then immediately available
again and the PABX can be reached by external parties.
Call forwarding by a team member is only possible when »Team call simultaneous« call signaling has been set for the
team.
Direct dial-in
Say you are away from home. However, somebody at home should be able to reach you quickly and easily by telephone if needed (for exam-
ple children or elderly relative). Since you have already configured the function »Direct call« for one or more of your phones, you need to lift
the handset of one of these phones. After five seconds without any numbers being dialed the PABX will automatically dial the defined direct
call number.
You can enter the number yourself of the party that is to be called prior to calling. The PABX system recognizes by the length of the number
whether you have entered an internal or external number. You therefore do not need to input a prefix code for external numbers. To change
an already entered direct call number, just enter the new one without deleting the old number. You can also perform the following settings
using PC configuration.
Preparing and activating a direct call with set numbers
b *65 t # q a
Lift up
handset
Call number Ack.
signal
Replace
handset
Now, when you lift up your handset the direct call number will be dialed after five seconds.
Calling several telephones (team call)
17