manualshive.com logo in svg

Funkwerk elmeg t444, Operating Instructions Manual, Page: 18 / 84

Share
Download
Funkwerk elmeg t444 Operating Instructions Manual Download Page 18

In the following procedures a distinction is made between analog and ISDN telephones with regard to use and acous-
tic tones/signals.

Programming an automatic »Completion of Call on No Answer« for analog phones

l

*40

q

a

Internal or external

subscriber is busy or

does not answer

Ack.

signal

Replace

handset

When the subscriber that was called hangs up his/her handset your telephone will ring.
When you lift up your handset the subscriber for which completion of call is active is called. If the party answers you can conduct your call.

Programming an automatic »Completion of Call on Busy« for ISDN phones

This feature is supported for ISDN telephones by the PABX at the internal ISDN connection. Please refer to the operating instructions for
your ISDN telephone for proper use.

Programming an automatic »Completion of Call on No Answer« for ISDN phones

l

*40

q

a

Internal or external subscri-

ber does not answer

Ack. signal

(or voice announcement)

Replace

handset

When the subscriber that was called hangs up his/her handset your telephone will ring.
When you lift up your handset the subscriber for which completion of call is active is called. If the party answers you can conduct your call.

Deleting automatic completion of call for analog phones

Analog telephones use this procedure for canceling:

·

Internal and external completion of call to busy subscriber.

·

Internal completion of calls on no reply.

An external »Completion of calls on no reply« is canceled by the exchange after the defined time period expires.

b

#40

q

a

Lift up

handset

Call-backs

delete

Ack.

signal

Replace

handset

Deleting an automatic »Completion of Call on No Answer« with ISDN phones

Internal completion of calls on no reply is canceled with ISDN telephones using the following procedure. An external »Completion of calls
on no reply« is canceled by the exchange after the defined time period expires.

b

#40

q

a

Lift up

handset

Cancel completion of calls

Ack.

signal

Replace

handset

Trunk group (routing discrimination)

14

Summary of Contents for elmeg t444





















































































Reviews:

No comments