Funkwerk DECT80, Operating Instructions Manual, Page: 62 / 84

60
Setting the dialing method
You can set the dialing method in accordance with your connection settings/conditions.
Press Menu , select Settings and press OK .
Select and press OK .
Select and press OK .
Select one of the menu items and press OK to confirm.
I
The common dialing method for analog connections.
May be required with older PABX-systems. For more information, please
refer to the user manual.
Tone dialing is the default setting for use with elmeg/funkwerk PABX systems.
Setting the flash interval
Press Menu , select Settings and press OK .
Select and press OK .
Select one of the times offered and press OK .
The Flash time for features at elmeg/funkwerk PABX systems is normally 100 ms; this is also the
default setting.
Flash Time
Pulse
Tone
Dial Mode
Setup Base