Funkwerk DECT80, Operating Instructions Manual, Page: 61 / 84

59
Selecting a base station
If your handset is registered at more than one base station you can select the base station from
which you wish to use your handset. The currently active base is identified by “
■
“ .
Press Menu , select Settings and press OK .
Select and press OK .
Select and press OK .
Select a base station from the list and press OK . If your handset is not within
the coverage range of the selected base station, the message "No connec-
tion" is shown in the display. You must then select a different base station.
Auto-answer
If your handset is in the base station and an incoming call is received while automatic accepting of
calls is activated, you only need to remove the handset from the base station to take the call.
Press Menu , select Settings and press OK .
Select and press OK .
Select and press OK .
Select or and press OK .
Off On
Auto Talk
Setup Handset
Base Selection
Setup Handset