Funkwerk DECT80, Operating Instructions Manual, Page: 25 / 84

23
Accepting a call
Calls are signaled acoustically at the handset and at the base station. They are also shown in the
handset display.
• The caller’s number is shown in the display when this performance feature is available at your
connection.
• The number is not displayed when the party is anonymous, i.e. when the caller suppresses
caller ID, or when this feature is not technically possible.
Handset in the base station
“Automatic accepting of calls“ activated (see page 59).
Remove the handset from the base stations and conduct the call.
/ “Automatic accepting of calls“ not activated:
Press the Call key or the hands-free calling key and conduct the call.
Handset not at the base station
/ Press the Call key or hands-free calling key and conduct the call.
Ending the call
Press the Hang-up key, or place the handset in the base station.