Funkwerk DECT80, Operating Instructions Manual, Page: 12 / 84

10
Functions with elmeg/funkwerk PABX systems
Note the following when connecting your DECT80 to an elmeg/funkwerk PABX system:
• Check whether “Automatic access to exchange line" or “Manual access to exchange line” is pro-
grammed in the PABX system. Depending on this setting, you will hear either the internal or exter-
nal dial tone when you press the Call key on the handset.
Also follow the instructions given in the operating instructions for your PABX system for “Automatic
access to exchange line”.
• The default setting for the flash time of the DECT80 is 100 ms. You can change the flash duration
under “Setting the flash time”, see page 60.
Instructions for operation with “Automatic access to exchange line”
• If you hear the external dial tone, you must press the asterisk (*) key to make internal calls (party
being called is connected to the same PABX system).
• Remember to take this into account when storing internal phone numbers in the phone book and
for other similar functions.
Instructions for operation without “Automatic access to exchange line”
• If you hear the internal dial tone you must first dial “0” to access an external line. You will hear the
external dial tone.
• When you save phone numbers in the phone book, and for other similar functions, you must also
save this “0” (exchange code) with the number.
• Note that to use the performance feature “SMS”, the “SMS Center” must also be saved with a “0”
(exchange code), see page 36.
• You must activate the setting “Transmit exchange code” in the configuration program for the
“PABX system” for the internal subscriber line connected with the DECT80 to enable the phone
numbers to be stored properly in the “Caller list”.