3.2.3 LEDs
The device LEDs provide information on certain activities and statuses of the device.
They are arranged as follows:
Fig. 16: LEDs on
bintec R1200w
In operating mode, the LEDs display the following status information for your device:
LED status display
LED
State
Information
Power
on
The power supply is connected.
State
Permanently on or
off
Error.
flashing
The device is active.
ETH 1 to 5
Top row
on
The device is connected to the Ethernet.
flashing
Data traffic via the Ethernet interface.
ETH 1 to 5
Bottom row
on
Data traffic at 100 mbps.
off
Data traffic at 10 mbps.
ISDN-0 B/D
Top row
on
ISDN D-channel is active.
ISDN-0 B/D
Bottom row
on
One ISDN B channel is active.
3 Technical data
Funkwerk Enterprise Communications GmbH
34
bintec R1xxx/R3xxx/R4xxx
