Funkwerk artem ComPoint Butterfly, Manual, Page: 38 / 118

The artem ComPoint Manager
2-12
The factory-set password for the administrator user level is
admin.
If you check the Assign password to all devices option, the
password will also be used for all other devices displayed in
the main window. If new devices are added, you have to
enter the password again.
If the ComPoint Manager is terminated, the password has
to be reentered when restarting the ComPoint Manager.
You can delete the password in the user interface of the device
under
Configuration > Administration . Moreover, you can change
the password in the ComPoint Manager under Configuration >
Password change .
Password Change
Note:
The default password of the device is “admin”. You should change
it immediately after commissioning the device to protect it from
unauthorized access. Moreover, you should change the password
in regular intervals.
Should you have to send in the device for repair, please reset the
password to the factory default parameter “admin”.
To change the password of your device, proceed as follows:
1. Select the device in the list and select the Configuration >
Password change menu.
The following dialog box is opened: