Funkwerk artem ComPoint Butterfly, Manual, Page: 30 / 118

The artem ComPoint Manager
2-4
The Functions of the ComPoint Manager
Searching for Available Devices
You can configure search options via the Extras > Options dialog
box.
• If you check the Enable extended view option, the main window is
extended by the Application , Product name , and Version columns.
• If you want to repeat the discovery process automatically, check the
Enable automatic discovery option. Under Retry discover after , you can
select values from 10 to 60 seconds. After the expiration of this time
interval, the ComPoint Manager will automatically restart the discov-
ery process.
• If you want the ComPoint Manager only to update the parameters for
the devices already found during the search, select the
Ignore new dis-
covered devices option. In this case, the ComPoint Manager will not
search for new devices. This option is helpful if a very large number of
devices is operated in the network.
• You can abort the discovery process after a defined time interval. In
small networks with only a few devices, for instance, you can reduce
this time span to 3 seconds. The maximum value is 10 seconds.