Funkwerk artem ComPoint Butterfly, Manual, Page: 28 / 118

The artem ComPoint Manager
2-2
For security reasons, it is recommended to change the preset pass-
word as soon as possible.
• If your computer accommodates various network interfaces, you can
configure a special multicast interface in the artem ComPoint Man-
ager with which you can search for the devices (see
How to Define a
Multicast Interface on Page 2–19 ).
The User Interface of the ComPoint Manager
The interface of the ComPoint Manager consists of four compo-
nents which will be illustrated in the following:
The Main Window
The main window is designed like a table and is divided into the
columns
MAC address, Node name, IP address, IP mode, and State .
According to the configuration, it also contains the columns
Application, Version, and Product name .
After booting the ComPoint Manager, it immediately searches the
network for devices. As soon as the ComPoint Manager has found
devices, the columns are filled with data referring to the corre-
sponding devices.
If the main window remains empty, the ComPoint Manager has
not found any devices.
Status bar
Tool bar
Main
window
Menu