ft636 (14.10.2013)
- 12 -
Kompetent für Elektroniksysteme
ft636 (14.10.2013)
- 13 -
Kompetent für Elektroniksysteme
As mentioned above the FT636 IP Interfaces are confi gurated with a web browser. It does not mat-
ter which operation system (Windows, Linux, Apple Mac ...) is used on the PC. The web browser
(Firefox, Internet Explorer, Opera,...) can also be chosen freely.
Only the IP addresses have to be set so that the IP Interface can be addressed. The necessary
steps are shown here briefl y.
Windows PC
The confi guration here is described with a Windows XP PC, but the procedure is the same for
Windows 98, ME, 2000 and also Vista.
The network connections are opened by Start->Settings. Double click on the icon LAN-connection
to reach the window Status of LAN-connection. Now click on Preferences and select Internet proto-
col (TCP/IP). Preferences open network settings. It may look like this example.
Preparing the PC for confi guration
If the PC is not attached to a network, you can direct-
ly enter the IP address and the net mask here (f.e. IP
address 192.168.16.254, net mask 255.255.255.0).
Standardgateway and DNS server addresses stay
blank. The next two steps can be omitted.
The components are all connected with a switch or a
hub.
If the PC is attached to an existing network, the follo-
wing steps are necessary.
IMPORTANT:
To confi gure the settings,
automatic
IP-address
must not be activated. It must be set to
use following IP address
and a valid network address
has to be entered. Of course the fi gures in the example
have to be adjusted to the respective environment.
You can enter a second IP address by clicking on Ad-
vanced. Here you now enter the fi gures which make it
possible to connect to the FT636 IP interfaces. In this
case you can use the fi gures of the example.
Now two IP addresses are assigned to the PC, so that it
is attached to the regular network as well as forming an
own network segment with the IP Interfaces.
The components are connected to the existing RJ-45-
network jacks.
Summary of Contents for FT 636
Page 1: ...IP Interface FT 636...
