First steps
Charging the battery
54
Setting and detection of charger types
Individual charger settings for each of the charger/station (tabletop charger), multich-
arger, system charger and car charger types can be defined in the radio set.
Each charger has a code by which the radio set recognises the type of charger.
When the radio set is inserted in a charging device, the settings defined for the
respective type of charger are detected and can be used for the charging process.
System chargers can be used, for example, in lockers that require a different type of
charging behaviour to that required in a tabletop charger at a work station. The radio
set then picks out the charging behaviour based on the appropriate identification and
setting of the type of charger.
For further information regarding charging process signalling, see Operating condi-
tions of the right-hand signal LED on the radio set (p. 23).
