function Innovation & Technology AS
- 5 -
Manual – KNX MultiLight Art.nr 44001
Doc.no. D-TS-ML-K-005-A
Example 3 – Ventilation:
The KNX MultiLight can control ventilation for the office space based on the movement
detector and the temperature regulator. The ventilation can be reduced to a minimum
when the room is vacant and the controller is in standby mode. The ventilation system
will be asked to increase the ventilation when a person enters the room.
The ventilation system will usually have a cooling effect for the room because of lower air
temperature in the supplied air. The cooling regulator of the KNX MultiLight can trigger
the need for extra ventilation based the room temperature.
Example 4 – User control:
The KNX MultiLight will usually control the climate and lighting automatically. Occupants
may want to take control over their own environment and change lighting, temperature
and shutters manually. The KNX MultiLight can be fitted with a user panel that will
replace the luminaire pull cord. The panel can give the user temperature control, control
of shutters and lighting control. The temperature setpoint can be adjusted -3°C to +3°C
from the user panel (see Figure 1).
Figure 1 - KNX MultiLight user panel
