FUNAI LT840-M19, Owner'S Manual

Page: 17 / 30

EN
17
You can adjust the detailed picture settings according to your
personal preference.
1
Press MENU to display the menu.
2
Press
K
/
L
to select [PICTURE] , then press OK .
3
Press
K
/
L
to select [Features] , then press OK .
DNR (Digital Noise Reduction)
You can adjust to reduce the appearance of digitizing error
caused by the compression.
4
Press
K
/
L
to select [DNR] , then press OK .
5
Press
K
/
L
to select the setting you want, then press
OK
. (
[High]
,
[Mid]
, or
[Low]
)
6
Press MENU to exit.
CTI (Colour Transient Intensity)
You can adjust the picture for colour errors.
4
Press
K
/
L
to select [CTI] , then press OK .
5
Press
K
/
L
to select the setting you want, then press
OK
. (
[High]
,
[Mid]
, or
[Low]
)
6
Press MENU to exit.
Adaptive Luma Control
You can adjust changes in the luminance of the picture.
4
Press
K
/
L
to select [Adaptive Luma Control] .
5
Press
K
/
L
to select the setting you want, then press
OK . ( [On] or [Off] )
6
Press MENU to exit.
Backlight
You can adjust backlight brightness.
4
Press
K
/
L
to select [Backlight] , then press OK .
5
Press
0
/
1
to adjust, then press OK .
6
Press MENU to exit.
Advanced Picture Adjustment
DTV ATV
5
Features
PICTURE
SOUND
CHANNEL
OTHERS
LANGUAGE
DNR
CTI
Adaptive Luma Control
Backlight
Features
Mid
On
Mid
0
(cursor)
1
(cursor)
dim brighten
Note:
If you adjust the brightness except 1,
[ECO Mode]
will be set to
[Off] .
OK
5 Backlight
Adjust OK