OPERATIONS
Read this first
These operations are accessible by remote control. Some
may also be accessible by controls on the main unit.
Watching a TV Programme
To select a channel
Use
q
r
/
s
repeatedly to select your desired channel, or
use
the Number buttons
to enter a channel number, then
press
OK
for quicker access.
(e.g.) If you want to select the channel 24 without pressing
OK
, press
2
first, then press
4
within 3 seconds.
To adjust the volume
Use
A
+/–
to adjust the audio volume.
Press
D
to turn on or off the sound right away.
●
You can recover the original volume by pressing
D
again or
A
+/–
.
Channel List
You can easily find a channel you want.
1
Press
OK
while watching a programme.
2
Use
K
/
L
to select the channel you want to watch,
then press
OK
.
700
901
51
12
5
2
1
EUT1
BCT
WNS
Drama Now!
ETV
EUT1 Radio
Euro CH
Next Page
Prev Page
Channel List
Channel List
1
h
Radio Channel
2
e
Analogue Channel
●
Use
RED
/
GREEN
to move to the previous or next page.
3
Press
BACK
to exit.
●
You can edit the channel list at “Channel Settings” (p. 16).
Sleep Timer
The sleep timer can be set the unit to go into standby mode
after an incremental period of time.
1
Press
SLEEP
repeatedly to change the sleep time period.
●
Each time you press
SLEEP
, the timer increases from 10 minutes
up to 120 minutes.
●
Press
SLEEP
repeatedly until
[Off]
appears to cancel the sleep timer.
●
If the unit goes into standby mode, the sleep timer will be cancelled.
ECO Mode
When you set
[ECO Mode]
to
[On]
, backlight brightness
will be reduced automatically which may save on power
consumption.
Press
ECO
I
repeatedly to select
[On]
or
[Off]
.
On
The illuminance sensor senses the brightness of
the environment and, darkens the backlight
automatically when the room gets dark.
Off
The illuminance sensor is not effect, and the
backlight level gets back the value you adjusted.
Sound Select
DTV
Press
AUDIO
to display currently selected audio language
with the number of available ones and press repeatedly to
cycle through them.
●
The display image can be found on the “TV Screen Information”
Dolby Digital sound
Dolby Digital Plus sound
HE-AAC sound
no icon
MPEG sound
ATV
Press
AUDIO
to display currently selected audio mode and
press repeatedly to cycle through the available audio mode.
(e.g.)
Dual 2
Dual 1
Stereo
Nicam Mono
Nicam
Dual 2
Nicam
Dual 1
Mono
Mono
Mono
Mono
Mono
Nicam Stereo
EN
8