FUNAI LED40-H9200M Owner'S Manual Download Page 23

Page: 23 / 26

OTHER INFORMATIONS

Specifications

Model

LED40-H9200M

LCD

40 inches

Television system

DVB-T(MPEG2/H.264), PAL-B/G, D/K, SECAM-B/G, D/K, L

Terminals

Antenna

UHF/VHF 75 ohm

Audio Input

RCA jack (L/R) × 2

Composite Video Input

RCA jack (shared terminal with Y of components) × 1

Component Video Input

RCA jack (Y/Pb/Pr) × 3

HDMI Input

HDMI 19pin × 3

PC Input

D-Sub 15pin × 1 (RGB) / Mini jack Ø3.5 mm × 1 (Audio)

SCART

SCART × 1

Headphone Audio

Output

Mini jack Ø3.5 mm × 1

Coaxial Digital Audio

Output

RCA jack × 1

USB Input

USB × 1

Common Interface

CI Slot × 1

Sound Output

10 W, 8 ohm × 2

Remote control

Digital encoded infrared light system

Operating temperature range

5 °C to 40 °C

Power requirements

AC 220-240 V ~ , 50 Hz

Power consumption

99 W (standby: less than 0.5 W)

Dimensions

*Protruding parts

excluded.

without base

H:577.0 / W:956.0 / D:40.0

with base

H:621.0 / W:956.0 / D:240.0

Weight

without base

13.1 kg

with base

15.6 kg

Trademark Information

●

Manufactured under license from Dolby Laboratories. Dolby

and the double-D symbol are trademarks of Dolby

Laboratories.

●

HDMI, the HDMI Logo, and High-Definition Multimedia

Interface are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other

countries.

●

DVB is a registered trademark of the DVB Project.

●

The “HD TV 1080p” qualifier Logo is trademark of

DIGITALEUROPE.

License

This product uses some open source software:

●

FreeType

●

ICU License

“License Statement” is written at the end of book.

If you are interested in obtaining GPL source code used in this

product, please contact FUNAI ELECTRIC EUROPE Sp. z o.o.,

ul. Inżynierska 1, 67-100 Nowa Sól, Poland.

Summary of Contents for LED40-H9200M



























Search results

Summary of Contents for LED40-H9200M

Reviews:

Related manuals for LED40-H9200M

Brands by name

Popular brands

FUNAI LED40-H9200M, Owner'S Manual

Search results

Summary of Contents for LED40-H9200M

Reviews:

Related manuals for LED40-H9200M

Brands by name

Popular brands