•
Emergency LED Driver
•
Output Power: 10W Max.
•
Universal Voltage: 100-277VAC, 50/60Hz
•
Output Current: 0.62A
•
•
Long Case and Terminal
•
Output Voltage Range of 16-55V
IP20
General Specifications
This Driver Will Operate The Following LED Modules: Any LED module designed to accept input voltage range of 16-55VDC and can operate
up to current of 0.62A.
IP20
NiCd/LiFePO4
EL-T
E477042
INSTALLATION INSTRUCTIONS
•
U-OUT: 60VDC
Mechanical Data
Tolerance=±0.02"
Fulham extends a limited warranty to the original purchaser or first user for a period of
from the date of manufacture when properly installed
5 years
and operated under normal conditions of use. The usage of appropriate series connected Surge Protection Device (SPD) is required in high risk
applications. For complete terms and conditions, please refer to the Warranty Center at www.fulham.com. Specifications subject to change without
notice.
Page 1 of 10
FHSCP-UNV-10P-L-SD
2017-689-1 Rev C
Input Voltage
Input Current
Input Power
AC LED Driver Input Current (LED Driver Neutral)
Standby Input Power
Output Current
Output Voltage Range
Output Power
AC LED Driver Output (LED Driver )
Number of Output Channels
RFI/EMI
Output Type
Rated Ambient (ta)
Sound Rating
Input Surge Protection
Protections
Service Life
Approvals / Class
100-277V~, 50/60Hz
60mA
3A~ Max.
6W
<0.5W
Constant Power
16-55V
10W Max. (1-10W @ 3000mAh Battery, 1-6W @ 1800mAh Battery, 1-5W @ 1500mAh Battery)
1 Channel
3A
Max., 55V
Max.
FCC Part 15A Non-Consumer
LED Class 2
NiCd 0°C to 55°C (32°F to 131°F) / LiFePo4 10°C to 55°C (50°F to 131°F)
A
Line-Neutral kV, Line & Neutral-Ground 2kV
2
Over / Under Voltage Protection
Output Open Circuit Protection
Overload Protection
50,000 hours
0.62A
Battery Type
NiCd 9.6VDC / LiFePO4 9.6VDC
Battery Capacity Available
Test Switch Remote Mounting Distance
3000mAh, 1800mAh, 1500mAh
20' (6m) Max.
Battery Recharge Time
24 Hours@NiCd / 12 Hours@LiFePO4(Refer To Battery chart)
Driver Type
RoHS, IP20, CEC Title 20, cULus LISTED
Battery Discharge Time
90 Minutes Min.